you are going to install a PCI audio add-on card.
SIS-7013 S/W Modem (Enabled)
Enables and disables the onboard modem. Disable this item if you are going
to install an external modem.
SIS-1394 Controller (Disabled)
Enables and disables the onboard 1394 controller.
Press <Esc> to return to the Integrated Peripherals screen.
Onboard SuperIO Device
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
Onboard SuperIO Device
Item Help
Onboard FDC Controller
[Enabled]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Serial Port 2
[3F8/IRQ3]
UART Mode Select
[Normal]
UR2 Duplex Mode
[Half]
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[ECP]
ECP Mode Use DMA
[3]
Menu Level
↑
↓
→
←
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous
Values
F6:Fail-Safe
Defaults F7:Optimized
Defaults
Onboard FDC Controller (Enabled)
This option enables the onboard floppy disk drive controller.
Onboard Serial Port 1 (3F8/IRQ4)
This option is used to assign the I/O address and interrupt request (IRQ) for
onboard serial port 1 (COM1).
Onboard Serial Port 2 (3F8/IRQ3)
This is the default address for devices using serial port 2 if you do not have
any devices plugged into this port disabled is preferred.
UART Mode Select (Normal)
This option is used to select an operating mode for the second serial port.
UR2 Duplex Mode (Half)
In an infrared port mode, this field appears. Full-duplex mode permits simulta-
neous two-direction transmission. Half-duplex mode permits transmission in
one direction only at a time. Select the value required by the IR device con-
nected to the IR port.
37