46
IRQ/Event Activity Detect
This item opens a submenu that enables you to set events that will resume
the system from a power saving mode.
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
IRQ/Event Activity Detect
Item Help
PS2KB Wakeup Select
[Hot key]
PS2KB Wakeup from S1-S3
[Disabled]
Power Button Lock
[Disabled]
PS2MS WakeUp from S1-S3
[Disabled]
USB WakeUp from S1-S3
[Disabled]
VGA
[OFF]
LPT & COM
[LPT/COM]
HDD & FDD
[ON]
PCI
Master
[OFF]
PowerOn by PCI Card
[Enabled]
WakeUp On LAN/RIng
[Disabled]
RTC Alarm Resume
[Disabled]
x Date (of Month)
0
x Resume Time (hh:mm:ss)
0 0 0
IRQs Activity Monitoring
[Press Enter]
Menu Level
↑
↓
→
←
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
PS2KB Wakeup Select (Hot key)
This option allows you to set hot key combination to turn on the system by
keyboard.
PS2KB/MS Wakeup from S1-S3 (Disabled)
This option enables you to allow keyboard or mouse activity to awaken the
system from power saving mode.
Power Button Lock (Disabled)
This option allows you to enable or disable the power button lock BIOS func-
tion.
USB Resume from S1-S3 (Disabled)
When set to Enabled, the system power will resume the system from a power
saving mode if there is any USB port activity.
VGA (Off)
When set to On, the system power will resume the system from a power sav-
ing mode if there is any VGA activity.
LPT & COM (LPT/COM )
When this item is enabled, the system will restart the power-saving timeout
counters when any activity is detected on the serial ports, or the parallel port.
HDD & FDD (ON)
When this item is enabled, the system will restart the power-saving timeout
counters when any activity is detected on the hard disk drive or the floppy