9
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1
is labeled.
Jumper Settings
Jumper
Type
Description
Setting (
default
)
JP1
3-pin
Clear CMOS
1-2: Normal
2-3: Clear CMOS
JP1
1
JP8 & JP9
3-pin
CPU Frequency
select jumper
See table on following
page for settings.
JP9
1
JP8
1
JP1 – Clear CMOS Jumper
Use this jumper to clear the contents of the CMOS memory. You may need to
clear the CMOS memory if the settings in the Setup Utility are incorrect and
prevent your motherboard from operating. To clear the CMOS memory, dis-
connect all the power cables from the motherboard and then move the jumper
cap into the CLEAR setting for a few seconds.