33
Using BIOS
OnBoard Floppy Controller (Enabled)
Use this item to enable or disable the onboard floppy disk drive interface.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port address.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port address.
Parallel Port Mode (ECP)
Use this item to select the parallel port mode. You can select Normal (Standard Parallel
Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or EPP & ECP.
Parallel Port IRQ (IRQ7)
Use this item to assign IRQ to the parallel port.
OnBoard PCI IDE Controller (Both)
Use this item to enable or disable either or both of the onboard Primary and Secondary IDE
channels.
Features Setup
This page sets up some parameters for peripheral devices connected to the system.
OnBoard Floppy Controller
Enabled
Serial Port1 Address
3F8/IRQ4
Onboard IR Port
Disabled
Parallel Port Address
378
Parallel Port Mode
ECP
ECP Mode DMA Channel
DMA3
Parallel Port IRQ
IRQ7
OnBoard PCI IDE Controller
Both
Onboard SATA-IDE
RAID
Audio Device
Enabled
Modem Device
Auto
Ethernet Device
Enabled
Onboard USB Function
Enabled
USB Function For DOS
Disabled
Allow BIOS to Enable or
Disable Floppy Controller.
Help Menu
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
Features Setup
ECP Mode DMA Channel (DMA3)
Use this item to assign the DMA Channel under ECP Mode function.
Onboard IR Port (Disabled)
Use this item to enable or disable the onboard IR port function.
: Move
F10: Save
F1: General help
+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
mnkl
Summary of Contents for K8T890-A
Page 1: ......
Page 2: ......
Page 10: ...4 IntroducingtheMotherboard Motherboard Components...