manualshive.com logo in svg

ECS H77H2-M3, User Manual, Page: 74 / 80

Share
Download
ECS H77H2-M3 User Manual Download Page 74

70

H77H2-M4 USER MANUAL

Chapter 5

Pressing <Y> deletes all the data in the HDDs.

5.

The following screen appears, displaying the relevant information about

the RAID set you created.

Users please be noted that RAID 0 (Stripe) is set to accelerate the data
access, and RAID 1 (Mirror) is set to provide the data backup. If you want
to set RAID 0, you need to set the 

2nd Boot Device

 item in the BIOS to 

Intel

Volume0

. See section “Advanced Setup” for details.

4.

When done, press <Enter> to confirm the creation of the RAID set. A dia-

logue box appears to confirm the action. Press <Y> to confirm; otherwise,
press <N>.

      

Main

             

 Advanced          Chipset        

 

      M.I.B III             

Boot  

              Security       Save &Exit

Hard Disk Drive Priorities

1st Boot

  Intel volume 0

Sets the system boot order

+/- : Change Opt.

Enter/Dbl Click : Select

lk

mn

: Select Screen

/

Click : Select Item

F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit

Summary of Contents for H77H2-M3

















































































Reviews:

No comments