manualshive.com logo in svg

ECS H61H2-M8, User Manual, Page: 54 / 66

Share
Download
ECS H61H2-M8 User Manual Download Page 54

H61H2-M8 USER MANUAL

50

Chapter 3

B.O.M.P Technology (Enabled)

This item allows users to enable or disable B.O.M.P technology. This function can run
safe setting to setup menu when system boot fail 3 times.

Spread Spectrum (Enabled)

If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.

Intel(R) Core(TM) i3-3250 CPU @ 3.50GHz

This is display-only field and displays the information of the CPU installed in your
computer.

Processor Speed (3500 MHz)

This item shows the CPU speed.

Memory Frequency (1600 MHz)

This item shows the memory frequency.

Auto Detect DIMM/PCI Clk (Enabled)

When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.

Total Memory (4096 MB (DDR3))

This item shows the total memory of DDR3.

This item controls the four bank activate time in memory clock cycles.

Four Active Window Delay (tFAW) (24)

Press <Esc> to return to the M.I.B III menu page.

Read CAS# Precharge (tRTP) (6)

This item controls the Read to PRECHARGE delay for memory devices, in memory
clock cycles.

Summary of Contents for H61H2-M8



































































Reviews:

No comments