manualshive.com logo in svg

ECS H61H2-M8, User Manual, Page: 43 / 66

Share
Download
ECS H61H2-M8 User Manual Download Page 43

H61H2-M8 USER MANUAL

39

Chapter 3

 

 

 

 

 

 USB Configuration

Scroll to this item and press <Enter> to view the following screen:

All USB Devices (Enabled)

Use this item to enable or disable all USB devices.

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices. Setting to Audio
allows the system to detect the presence of the USB device at startup. If detected,
the USB controller legacy mode is enabled. If no USB device is detected, the legacy
USB support is disabled.

Press <Esc> to return to the Advanced Menu page.

         

Main 

           

 

Advanced    

       Chipset            M.I.B III             Boot                Security              Exit

+/- : Change Opt.

Enter/Dbl Click : Select

: Select Screen

/Click: Select Item

F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit

USB Support Parameters

USB Configuration

All USB Devices

    Enabled

USB 3.0 Controller

    

Enabled

Legacy USB Support

    Enabled

USB 3.0 Controller (Enabled)

Use this item to enable or disable USB 3.0 controller.

Summary of Contents for H61H2-M8



































































Reviews:

No comments