ECS H61H2-M6 User Manual Download | Manualshive

Page: 67 / 72

background image

63

Using the Motherboard Software

Windows 7/8 will appear below UAC (User Account Control) message after
the system restart. You must select “Yes” to install the next driver. Continue
this process to complete the drivers installation.

If the auto-install DVD-ROM does not work on your system, you can still install
drivers through the file manager for your OS (for example, Windows Explorer).

Look for the chipset and motherboard model, and then browse to the directory and
path to begin installing the drivers. Most drivers have a setup program (SETUP.EXE)
that automatically detects your operating system before installation. Other drivers
have the setup program located in the operating system subfolder.

Manual Installation

ECS Utility Software (Intelligent EZ Utility)

ECS Intelligent EZ Utility provides friendly interfaces under Windows O.S, which
makes your computing more easily and conveniently.

If the driver you want to install does not have a setup program, browse to the
operating system subfolder and locate the readme text file (README.TXT or
README.DOC) for information on installing the driver or software for your oper-
ating system.

These software(s) are subject to change at anytime without prior notice. Please
refer to the support disk for available software.

«
...
65
66
67
68
69
...
»

Summary of Contents for H61H2-M6









































































Reviews:

No comments

Related manuals for H61H2-M6

Brand: Yamaha Pages: 76

Brand: ASRock Industrial Pages: 44

Brand: MediaQ Pages: 25

Brand: Ublox Pages: 38

Brand: Freetech Pages: 79

Avnet Ultra96-PYNQ

Brand: Xilinx Pages: 19

DiskOnChip PCI-G-EVB

Brand: M-system Pages: 14

Brand: FIC Pages: 52

Brand: Advantech Pages: 124

Brand: ICP Pages: 50

Brand: Biostar Pages: 56

Brand: MSI Pages: 91

Brand: Gigabyte Pages: 38

Brand: Albatron Pages: 46

NVIDIA MS-7504PV

Brand: MSI Pages: 50

Brand: DFI Pages: 177

EVAL-AD2428WD1BZ

Brand: Analog Devices Pages: 6

Brand: Intersil Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands