ECS G43T-M3, Manual, Page: 45 / 52

39
Using BIOS
Save & Exit Setup
Highlight this item and press <Enter> to save the changes that you have made in the
Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears,
select [OK] to save and exit, or select [Cancel] to return to the main menu.
User Password (Not Installed)
This item indicates whether a user password has been set. If the password has been
installed,
Installed displays. If not, Not Installed displays.
Change User Password (Press Enter)
User Password
This page helps you install or change a password.
Install or Change the
password.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
User Password
Press <Esc> to return to the main menu setting page.
User Password : Not Installed
Change User Password Press Enter
If you have made settings that you do not want to save, use the “Exit
Without Saving” item and select [OK] to discard any changes you have
made.
Exit Without Saving
Highlight this item and press <Enter> to discard any changes that you have made in
the Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog box
appears, select [OK] to discard changes and exit, or select [Cancel] to return to the
main menu.
mnlk
: Move
F10: Save ESC: Exit
Enter : Select +/-/: Value
F9: Load Default Settings
F1: General Help
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the user password. This item will show if Supervisor Password is
set.