ECS G43T-M3, Manual, Page: 35 / 52

29
Using BIOS
Limit CPUID MaxVal (Disabled)
Advanced Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
Thermal Management (Enabled)
This item displays CPU’s temperature and enables you to set a safe temperature to
Prescott CPU.
TM Status(TM1/TM2)
This item shows TM function status if CPU can support TM function .
This item can support Prescott CPUs for old OS. Users please note that under NT
4.0, it must be set “Enabled”, while under WinXP, it must be set “Disabled”.
Enhanced Halt (C1E) (Enabled)
Intel XD Bit (Disabled)
Intel EIST (Enabled)
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Intel VT (Enabled)
Hardware Virtualization Technology enables processor feature for running multiple
simultaneous Virtual Machines allowing specialized software applications to run in
full isolation of each other.
This item enables or disables enhanced halt (C1E).
This item allows users to enable or disable the Intel XD bit.
This item allows users to enable or disable the EIST (
Enhanced Intel SpeedStep
technology.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Advanced Setup
Thermal Management Enabled
TM Status TM1/TM2
Limit CPUID MaxVal Disabled
Enhanced Halt (C1E) Enabled
Intel XD Bit Disabled
Intel EIST Enabled
Intel VT Enabled
Quick Power on Self Test Enabled
Boot Up Numlock Status On
APIC Mode Enabled
1st Boot Device Hard Drive
2nd Boot Device CD/DVD
3rd Boot Device Removable Dev.
Boot Other Device Yes
For the processor its
CPUID belows 0F41h.
TM2 only can be enable
under below setting.
1.Freq.>=3.6GHz FSB800
2.Freq.>=2.8GHz FSB533
Help Item
mnlk
: Move
F10: Save ESC: Exit
Enter : Select +/-/: Value
F9: Load Default Settings
F1: General Help