34
Using BIOS
Press <Esc> to return to the main menu setting page.
Power Management Setup
This page sets up some parameters for system power management operation.
Select the ACPI
state used for
System Suspend.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Power Management Setup
ACPI Suspend Type (S3)
Use this item to define how your system suspends. In the default, S3, the suspend
mode is a suspend to RAM, i.e, the system shuts down with the exception of a refresh
current to the system memory.
Parallel Port IRQ (IRQ7)
Use this item to assign IRQ to the parallel port.
Help Item
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices.
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
PWRON After PWR-Fail (Power Off)
This item enables your computer to automatically restart or return to its operating
status.
ACPI Suspend Type
S3
PWRON After PWR-Fail
Power Off
Resume By RING
Disabled
Resume By PCI/PCI-E/Lan PME
Disabled
Resume By USB (S3)
Disabled
Resume By PS2 KB (S3)
Disabled
Resume By PS2 MS (S3)
Disabled
Resume on RTC Alarm
Disabled
Resume By RING (Disabled)
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call
on the modem) awakens the system from a soft off state.
Resume By PCI/PCI-E/Lan PME (Disabled)
These items specify whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or component is
detected.
