30
Using BIOS
Advanced Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Setup
Thermal Management (Enabled)
This item displays CPU’s temperature and enables you to set a safe temperature to
Prescott CPU.
TM Status (TM1/TM2)
This item shows TM function status if CPU can support TM function.
Limit CPUID MaxVal (Disabled)
Use this item to enable or disable the Max CPU ID value limit. When supports
Prescott and LGA775 CPUs, enables this to prevent the system from “rebooting”
when trying to install Windows NT 4.0.
Enhanced Halt (C1E) (Enabled)
This item enables or disables enhanced halt (C1E).
Intel XD Bit (Disabled)
This item allows users to enable or disable the Intel XD bit.
Intel EIST (Enabled)
This item allows users to enable or disable the EIST
(Enhanced Intel SpeedStep
technology).
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Intel Virtualization Technol (Enabled)
Hardware Virtualization Technology enables processor feature for runningmultiple
simultaneous Virtual Machines allowing specialized softwareapplications to run in
full isolation of each other.
Help Item
For the processor its
CPUID belows 0F41h.
TM2 only can be enable
under below setting.
1.Freq.>=3.6GHz FSB800
2.Freq.>=2.8GHz FSB533
Thermal Management
Enabled
TM Status
TM1/TM2
Limit CPUID MaxVal
Disabled
Enhanced Halt (C1E)
Enabled
Intel XD Bit
Disabled
Intel Virtualization Technol
Enabled
Intel EIST
Enabled
Quick Power on Self Test
Enabled
Boot Up Numlock Status
On
APIC Mode
Enabled
1st Boot Device
Hard Disk Drive
2nd Boot Device
CD/DVD
3rd Boot Device
Removable Dev.
Hard Disk Drives
Press Enter
Boot Other Device
Yes
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
ECS eJIFFY Function
Disabled
