37
Using BIOS
Allocate IRQ to PCI VGA (Yes)
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You
set this value to No to free up an IRQ.
Press <Esc> to return to the main menu setting page.
PCI/PnP Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
Help Item
Init Display First
PCI
Allocate IRQ to PCI VGA
Yes
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PCI/PnP Setup
F10: Save ESC: Exit
+/-/: Value
Enter : Select
F9: Load Default Settings
F1:General Help
: Move
Select which graphics
controller to use as
the primary boot
device.
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Hardware Health Event Monitoring
Smart Fan Function
Press Enter
Shutdown Temperature
Disabled
CPU Temperature
: 42°C/107°F
CPU Fan Speed
: 4470 RPM
CPU Vcore
: 1.296 V
VDIMM
: 1.840 V
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PC Health Status
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
