ECS EVEm Series, User Manual, Page: 36 / 48

Mainboard User’s Manual
32
Power Management Setup Page
This page sets some of the parameters for system power
management operation.
CMOS Setup Utility – Copyright ( C ) 1984—2001 Award Software
Power Management Setup
Item Help
ACPI Function Disabled
Power Management Press Enter
PM Control by APM Yes
Video Off Option Suspend --> Off
Video Off Method Blank Screen
MODEM Use IRQ 3
Soft-Off by PWRBTN Delay 4 Sec
State After Power Failure Off
Keyboard Power On Disabled
Wake Up Events Press Enter
Menu Level
↑ ↓ → ←
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General
Help F5: Previous Values F6: BestPerf. Defaults F7: Optimized Defaults
ACPI Function Use this item to enable or disable the ACPI
function.
Power
Management This item acts like a master switch for the
power-saving modes and hard disk timeouts. If
this item is set to Max Saving, power-saving
modes occur after a short timeout. If this item is
set to Min Saving, power-saving modes occur
after a longer timeout. If the item is set to User
Define, you can insert your own timeouts for the
power-saving modes.
PM Control by
APM This field allows you to control the PC
Monitor’s power management features via Intel-
Microsoft Advanced Power Management
software. Once you have enabled the APM
interface, some settings made in the BIOS Setup
program may be overridden by APM.