ECS EVEm Series, User Manual, Page: 26 / 48

Mainboard User’s Manual
22
Running the Setup Utility
Every time you start your computer, a message appears on the
screen before the operating system loading that prompts you to
“
Hit <DEL>if you want to run SETUP” . Whenever you see this
message, press the Delete key and the Main menu page of the
Setup Utility appears on your monitor.
CMOS Setup Utility - Copyright (C)1984-2001 Award Software
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
Hardware Monitor Frequency/Voltage Control
Load BestPerf. Defaults
Load Optimized Defaults
Set Password
Save & Exit Setup
Exit Without Saving
Esc : Quit
↑ ↓ → ←
: Select Item
F10 : Save & Exit Setup
You can use the cursor arrow keys to highlight any of the options
on the main menu page. Press
Enter to select the highlighted
option. To leave the setup utility, press the Escape key. To cycle
through the Setup Utility’s optional color schemes, hold down the
Shift key and press F2 .
Some of the options on the main menu page lead to tables of items
with installed values. In these pages, use the cursor arrow keys to
highlight the items, and then use the
PgUp and PgDn keys to cycle
through the alternative values for each item. Other options on the
main menu page lead to dialog boxes that require you to answer
Yes or No by hitting the
Y or N keys.
If you have already made changes to the setup utility, press F10 to
save those changes and exit the utility. Press F5 to reset the
changes to the original values. Press F6 to install the setup utility
with a set of default values. Press F7 to install the setup utility with
a set of high-performance values.