10
Installing the Motherboard
Connecting Case Components
After you have installed the motherboard into a case, you can begin con-
necting the motherboard components. Refer to the following:
1
Connect the CPU cooling fan cable to
CPU_FAN.
2
Connect the system cooling fan connector to
SYS_FAN1.
3
Connect the case switches and indicator LEDs to the
PANEL1.
4
Connect the standard power supply connector to
ATX_POWER.
5
Connect the auxiliary case power supply connector to
ATX12V.
Connecting 20/24-pin power cable
User please note that the 20-pin and 24-pin power cables can both be connected
to the ATX_POWER connector. With the 20-pin power cable, just align the 20-
pin power cable with the pin 1 of the ATX_POWER connector. However, using
20-pin power cable may cause the system to become unbootable or unstable
because of insufficient electricity. A minimum power of 300W is recommended
for a fully-configured system.
20-pin power cable
24-pin power cable
With ATX v1.x power supply, user please note
that when installing 20-pin power cable, the latch
of power cable falls on the left side of the
ATX_POWER connector latch, just as the pic-
ture shows.
With ATX v2.x power supply, user please note
that when installing 24-pin power cable, the latch
of power cable clings the right side of the
ATX_POWER connector latch.
Summary of Contents for C51GM-M
Page 1: ......
Page 2: ......
Page 10: ...4 IntroducingtheMotherboard Motherboard Components ...
