manualshive.com logo in svg

ECS B85H3-M3, User Manual, Page: 46 / 78

Share
Download
ECS B85H3-M3 User Manual Download Page 46

Chapter 3

B85H3-M3 USER MANUAL

42

    USB Configuration

Scroll to this item and press <Enter> to view the following screen:

All USB Devices (Enabled)

Use this item to enable or disable all USB devices.

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices. Setting to Audio
allows the system to detect the presence of the USB device at startup. If detected,
the USB controller legacy mode is enabled. If no USB device is detected, the legacy
USB support is disabled.

Press <Esc> to return to the Advanced Menu page.

         

Main 

           

 

Advanced    

       Chipset            M.I.B. III             Boot                Security              Exit

+/- : Change Opt.

Enter/Dbl Click : Select

: Select Screen

/Click: Select Item

F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit

USB Support Parameters

USB Configuration

All USB Devices

    Enabled

Legacy USB Support

    Enabled

Summary of Contents for B85H3-M3















































































Reviews:

No comments