manualshive.com logo in svg

ECS B85H3-M3, User Manual, Page: 10 / 78

Share
Download
ECS B85H3-M3 User Manual Download Page 10

Chapter 1

6

B85H3-M3  USER MANUAL

I/O Ports

1. PS/2 Mouse and PS/2 Keyboard combo connector

Use this PS/2 port to connect a PS/2 mouse or a PS/2 keyboard.

2. USB 2.0 Ports

Use the USB 2.0 ports to connect USB 2.0 devices.

3. VGA Port

Connect your monitor to the VGA port.

4. DVI Port

You can connect the display device to the DVI port.

5. HDMI Port

You can connect the display device to the HDMI port.

6. LAN Port

Connect an RJ-45 jack to the LAN port to connect your computer to the Network.

7. USB 3.0 Ports

Use the USB 3.0 ports to connect USB 3.0 devices.

8. Line-in

(blue)

It can be connected to an external CD/DVD player, Tape player or other audio
devices for audio input.

9. Line-out

(lime)

It is used to connect to speakers or headphones.

10. Microphone

(pink)

It is used to connect to a microphone.

LAN  LED

Status

Description

OFF

No data

Orange blinking Active
OFF

No link

Green

Link

Activity LED

Link LED

Link LED

LAN Port

Summary of Contents for B85H3-M3















































































Reviews:

No comments