Chapter 3
B75H2-M3 USER MANUAL
55
This page enables you to set setup administrator password and user password.
Security Menu
Administrator Password Status (Not Install)
This item shows administrator password installed or not.
User Password Status (Not Install)
This item shows user password installed or not.
System Mode state (Setup)
This item shows system mode setup or not.
Secure Boot state (Disabled)
This item allows you to enable or disable the secure boot state.
Secure Boot (Enabled)
This item is used to control the secure boot flow, it is possible only if system runs in
User Mode.
Secure Boot Mode (Custom)
This item is used to select secure boot mode, when you select standard mode, se-
cure boot policy is fixed; when you select custom mode, the image execution policy
and secure boot key databases are changeable.
Main
Advanced
Chipset
M.I.B III Boot
Security
Exit
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
Secure Boot mode selector.
‘Standard’ -fixed Secure
boot policy, ‘Custom’ -
changeable Image
Execution policy and Secure
Boot Key databases
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Administrator Password Status
Not Install
User Password Status
Not Install
Administrator Password
System Mode state
Setup
Secure Boot state
Disabled
Secure Boot
Enabled
Secure Boot Mode
Custom
Image Execution Policy
Key Management
