ECS A880GM-M7, Manual

Page: 39 / 74

35
Using BIOS
Press <Esc> to return to the main menu setting page.
Resume on RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume at a fixed time based on the system’s RTC (realtime
clock). Use the items below this one to set the date and time of the wake-up alarm.
You must use an ATX power supply in order to use this feature.
PCI / PnP Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PCI / PnP Setup
Press <Esc> to return to the main menu setting page.
F10: Save ESC: Exit +/-/: Value Enter : Select
F9: Optimized Defaults F1:General Help
: Move
Allocate IRQ to PCI VGA Yes
Yes: Assigns IRQ to
PCI VGA card if card
requests IRQ.
No: Does not assign
IRQ to PCI VGA card
even if card requests
an IRQ.
Options
Allocate IRQ to PCI VGA (Yes)
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You
set this value to No to free up an IRQ.