Chapter 3
A78F2-TI USER MANUAL
35
Power Management Setup
This page sets up some parameters for system power management operation.
Press <Esc> to return to the Advanced Menu page.
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
About Resume by PCI/
PCI-E/LAN/Ext.USB3.0
PME
Power Management Setup
Resume By PME
Disabled
Resume By USB
Disabled
Resume By RTC Alarm
Disabled
EUP Function
Enabled
Power LED Type
Single Color LED
Resume By PME (Disabled)
This item specify whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or components
is detected.
Resume By USB (Disabled)
This item allows you to enable or disable the USB device wakeup function from S3
mode.
Resume By RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume at a fixed time based on the system’s RTC
(realtimeclock). Use the items below this one to set the date and time of the
wake-up alarm. You must use an ATX power supply in order to use this feature.
EUP Function (Enabled)
This item allows user to enable or disable EUP support.
Power LED Type (Single Color LED)
This item shows the type of the Power LED.
Main
Advanced
Chipset Boot Security Exit