41
Chapter 4: Software & Applications
Chapter 4 Software & Applications
Introduction
This chapter describes the contents of the support DVD-ROM that comes with
the motherboard package.
The support DVD-ROM contains all useful software, necessary drivers and utility
programs to properly run our products. More program information is available in
a README file, located in the same directory as the software.
To run the support disk, simply insert the disk into your DVD-ROM drive. An
Auto Setup screen automatically pops out, and then you can go on the auto-
installing or manual installation depending on your operating system.
If your operating system is Windows XP/Vista/7, it will automatically install all the
drivers and utilities for your motherboard.
Installing Support Software
1
Insert the support DVD-ROM disk in the DVD-ROM drive.
2
When you insert the DVD-ROM disk in the system DVD-ROM drive,
the disk automatically displays an Auto Setup screen.
3
The screen displays four buttons of
Setup
,
Utilities
,
Browse CD
and
Exit
on the right side, and three others
Drivers
,
Utilities
and
Information
at the bottom. Please see the following illustration.
The
Setup
button runs the software auto-installing program as explained in next
section.
The
Browse CD
button is a standard Windows command that you can check the
contents of the disc with the Windows file browsing interface.