38
2
Hardware Installation
2.5.5 IEEE 1394
1394_1
W
The system board is equipped with an onboard IEEE 1394 port
at location CN7 of the system board.
It is also equipped with a IEEE 1394 connector at location J9
(1394_2) for connecting an additional 1394 port. The 1394 port
may be mounted on a card-edge bracket. Install the card-edge
bracket to the system chassis then connect the cable connector
to the 1394 connector on the system board. Make sure pin 1 of
the cable connector is aligned with pin 1 of the J9.
BIOS Setting
Enable or disable the onboard IEEE 1394 in the Integrated Pe-
ripherals submenu (“Onboard Device” section) of the BIOS. Re-
fer to chapter 3 for more information.
W
1
TP
A+
Ground
TPB+
VCC
Key
TP
A-
Ground
TPB-
VCC
Shield
2
10
9
1394_2
