ECS 661FX-M Deluxe, Manual, Page: 34 / 42

29 29 29 29 29
Using BIOS
Video Off Option (Susp, Stby —> Off)
This option defines if the video is powered down when the system is put into
suspend mode.
Video Off Method (DPMS Supported)
This item defines how the video is powered down to save power. This item is
set to DPMS (Display Power Management Software) by default.
MODEM Use IRQ (AUTO)
If you want an incoming call on a modem to automatically resume the system
from a power-saving mode, use this item to specify the interrupt request line
(IRQ) that is used by the modem. You might have to connect the fax/modem to
the motherboard Wake On Modem connector for this feature to work.
HDD Off After (Disabled)
The IDE hard drive will spin down if it is not accessed within a specified length
of time. Options are from 1 Min to 15 Min and Disable.
Power Button Override (Instant Off)
Under ACPI (Advanced Configuration and Power management Interface) you
can create a software power down. In a software power down, the system can be
resumed by Wake Up Alarms. This item lets you install a software power down
that is controlled by the power button on your system. If the item is set to Instant-
Off, then the power button causes a software power down. If the item is set to
Delay 4 Sec. then you have to hold the power button down for four seconds to
cause a software power down.
Power On After Power Fail (Always Off)
This item enables your computer to automatically restart or return to its last
operating status after power returns from a power failure.
f PM Wake Up Events
Scroll to this item and press <Enter> to view the following screen:
This item opens a submenu that enables you to set events that will resume the
system from a power saving mode.
IRQ [3-7, 9-15], NMI (Enabled)
This option determines whether any activity for IRQ 3-7/9-15 will cause the
system to wake from a power saving mode.
IRQ 8 Break Suspend (Disabled)
Determines whether the system will monitor IRQ 8 activity and wake the system
from a power saving mode when IRQ 8 is activated.
Resume by RING (Disabled)
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming
call on the modem) awakens the system from a soft off state.
Resume by MACPME (Enabled)
Use this item to enable MAC activity to wakeup the system from a power saving
mode.