5
Connect the Lower Dividers
Install the Bottom Shelf
6
7
Slide Remaining Back Panels into Place
Install the Right Side Panel
8
Batch ID Sticker
See Next Page
Install eight
Cam Posts (K1)
into the threaded plastic inserts on the underside of
Lower Shelf (D)
with a Phillips screwdriver.
Reminder:
Do not overtighten, as the plastic threads can be stripped.
Place two
Cam Locks (K2)
into the recessed holes on each
Lower Divider (G)
with the arrow
facing the closest edge.
Attach the
Lower Dividers (G)
onto the Cam Posts on the underside of the
Top Panel (B)
, turn the
Cam Locks clockwise with a Phillips screwdriver to lock the
Lower Dividers (G)
onto the posts.
Install the
Bottom Shelf (E)
onto the
Lower Dividers (G)
with eight
Hex Screws (J)
using the Hex Tool.
Install the
Right Side Panel (A2)
onto the
Top Panel (B), Upper/Lower/Bottom Shelves(C/D/E)
with eight
Hex Screws (J)
using the Hex Tool.
Slide the remaining
Upper Back Panels (H
) into the grooves on
Top Panel (B) & Lower Shelf (D)
as shown, until fully seated into the groove on the sides of
Upper Dividers (F)
.
Slide the
Lower Back Panel (I
) into the grooves on
Lower Shelf (D) & Bottom Shelf (E)
as shown,
until centered on
Bottom Shelf (E).
Tip:
If the
Back Panels (H/I)
do not slide in easily, wiggle the panels while pushing into place.
