15
16
Notes:
· Pair and connect your Bluetooth device with EcoBoulder before using
this feature.
· If a call is received when you are listening to music, the music will
pause automatically.
· You can control Volume and Play / Pause music operations from
your Bluetooth enabled device.
Listening (AM/FM Mode)
Press
SOURCE
briefly to switch to FM or AM. Also, you can press
briefly to toggle between FM and AM. Press
to tune in a radio
station. To “seek” (jump to the next available station), press and hold
either button down for a few seconds until it starts to seek a station.
Press
to adjust the volume.
AM/FM Presets
Store a favorite radio station to quickly tune to a preset radio station.
There are 6 positions for AM station and 6 positions for FM stations.
While listening to a station you want to store, press and hold a preset
button (P1~P6) to assign the current station to that preset number. The
LED screen will flash 2 times to indicate it has been set.
If you want to listen to a stored preset, press a preset button (P1~P6) to
go to the stored radio station.
EcoConnect - Wireless Stereo
Connection of Two Speakers
When you have two EcoBoulder speakers and want to wirelessly pair
them for stereo sound, first follow the
Pairing a Bluetooth Device
instructions to connect one EcoBoulder speaker to your Bluetooth device.
Leave this EcoBoulder speaker powered on and connected to your device.
Next, turn on your second EcoBoulder speaker. Once the second speaker
is powered on (the Bluetooth light will be flashing), press the EcoConnect
Button
on both of your EcoBoulder speakers. Wait a few seconds
for the speakers to wirelessly connect. Both speakers will announce
“Connection Successful,” and the EcoConnect icon on the LED screen on
both units will light up once the connection is completed.
Once the two EcoBoulder speakers are connected via EcoConnect, start
playing music from your device. Both connected EcoBoulder units will
play the music from you device.
The EcoConnect default has your speakers playing in stereo mode. If you
would like to change which speaker is left or right or if you want to set
each speaker to play in mono mode you can press and hold
. Each
press and hold of
will change the speaker from RIGHT / LEFT to
LEFT / RIGHT to MONO.
The EcoConnect connection between the two EcoBoulder speakers
will
NOT
automatically re-connect after the speakers are turned off. To
re-establish EcoConnect between the speakers, after power off, please
follow the above steps.
