Cap, USB Power &
AUX-IN Connections
• Pull tab on the cap to
open the back panel
compartment for access
to AUX-IN & USB
Charging connections.
• AUX-IN can be used as
an optional connection
to play an audio device
using a 3.5mm audio
cable connection.
• Connect USB to
computer or power
outlet using a USB to
AC power adapter.
USB Connection
& Charging
• Charge the built-in
rechargeable battery
via USB cord (included)
connected to your
computer
OR
via a USB-
to-AC power adapter.
• When connected to a
power source via the
USB connection on the
back panel, the Battery
LED on the front panel
will indicate the power
status. If not connected
to the charging cable, the
LED will
NOT
indicate
the power status.
• A
RED
LED indicates
charging is in progress.
A
GREEN
LED
indicates the battery
is fully charged.
• The Power LED will flash
2 times quickly every
30 seconds when
approx. 30 minutes of
play time remains.
NOTE
: EcoXBT can charge
while playing audio. Do
NOT
charge if unit is wet
or damp.
Important
If the cap is not securely closed the unit is
NOT
watertight. To ensure the unit is watertight the back
panel rubber cap
MUST
be closed securely.
To securely close the back panel cap, the cap
MUST
be
inserted so that the lines on the cap align with the
back panel lines and the top of the
CAP IS PUSHED
FLUSH WITH THE BACK SURFACE
of the unit. The gray
rubber gasket around the edge of the cap cannot be seen.
USB & AUX-IN Connections
Back Panel & Cap
Summary of Contents for ECOXBT GDI-EGBT500-510
Page 1: ......
