Find & enable Bluetooth
on your Smartphone/
Smartdevice.
Press button once
on EcoXBT to initiate
Bluetooth. Blue LED will
blink rapidly indicating
ready to pair.
Find “ECOXGEAR” on
your Smartphone as a
pairing selection & select
“ECOXGEAR” to pair with
EcoXBT.
Select & play your music!
Bluetooth
On/Off
Press button once to Power
ON/OFF.
Green LED turns on & unit
beeps within 2-4 seconds
indicating power fully
initiated and set ON.
Speaker Volume
Press & hold button to
decrease
(
-
)
or increase
(
+
)
Speaker Volume.
NOTE
: Set your Smartphone
to maximum volume level
for best audio performance.
One short beep tone will
sound when maximum
volume setting is reached
on the EcoXBT.
TIP: BLUETOOTH PAIRING
Once paired, to connect to
an alternate device, open
the Bluetooth Section
within the device currently
connected to the EcoXBT
and remove the Bluetooth
connection. The EcoXBT
will then be available
to pair & connect to an
alternate Bluetooth enabled
Smartphone / Audio Device.
2
4
1
3
Track Selection
Press button once to select
Previous Song track
(
<<
)
&
Next Song track
(
>>
)
.
Play Pause Answer
Press button once to Pause
& Play a song track and to
Answer Mobile Calls (
MUST
be paired with Bluetooth).
Press button to answer
incoming calls from your
Smartphone. Listen to the
caller over EcoXBT speakers
& talk over the built-in
Microphone on the front of
the unit.
Battery Indicator
Connect USB to power
source. LED indicates
charging status.
RED
: charge in process
GREEN
: full charge complete
NOTE
: LED will blink 2 times
every 30 seconds to indicate
approximately 30 minutes
of play time remains.
Control Buttons
LED Status Indicators
Power, Bluetooth, Battery
Control Buttons & Operations
Summary of Contents for ECOXBT GDI-EGBT500-510
Page 1: ......
