Quick Start USER GUIDE
STEP 3
Bluetooth pairing & your Audio
Connecting with Bluetooth:
connect to your Smart-device & play AUDIO
When your ECOSTONE is turned ON the blue LED light on the top panel will flash rapidly indicating the unit is ready to
pair.
Turn on Bluetooth on your Bluetooth device (Smart-device) and set the device in pairing mode. Available Bluetooth
connections shall appear.
Select the ECOXGEAR speaker from the list of discovered devices on your Bluetooth device.
Wait for a few seconds until the connection is completed.
When the ECOXGEAR selection is made and the Bluetooth connection is completed your ECOSTONE announces:
“Bluetooth connected”
Once connected, select and play your desired audio
NOTE:
IF the LED is not flashing or if you wish to place your ECOSTONE in pairing mode, press and release the
Bluetooth button on the top panel. Your ECOSTONE shall announce
“pairing ready”
when ready to pair to a new device.
NOTE:
Your ECOSTONE shall sync & wirelessly pair with most Bluetooth enabled devices. The unit remembers the last
device paired and will automatically search for previous connections when the speaker is turned ON or when a device
comes back into Bluetooth range. If a connection is lost due to range, the speaker will look to re-establish that connection.
IF Bluetooth is turned OFF on your Smart-device, the ECOSTONE will not automatically look for the device.
RECOMMENDATION:
IF you are not familiar with Bluetooth pairing for your Smartphone or other Smart-device refer to
the User Guide for your Smartphone to learn how to add and pair a new device (ECOSTONE for instance) to your
Smartphone using Bluetooth.
NOTE:
Bluetooth Pairing & Connections - Once paired, should you have an issue switching between Bluetooth
connections between devices, open the Bluetooth Section within the device currently connected to the ECOSTONE and
delete the Bluetooth connection. The ECOSTONE will then be available to pair & connect to an alternate Bluetooth
enabled Smartphone / Audio Device
