Quick Start USER GUIDE
STEPS 1-2-3
Set Up Recommendations
STEP 1
CHARGE your ECOSTONE
Before you power on your ECOSTONE connect the USB Micro port to the USB cable and a power
source to fully charge your ECOSTONE for best performance.
NOTE:
Before using your ECOSTONE for the first time, charge the unit until all 4 LED battery level
indicators are solid green, indicating a full charge.
Typically approximately 3 hours of charging is required from a low to a FULL charge.
Power source options include the USB connection to your computer or a power outlet using a USB to
AC power adapter. Recommend always using the USB cable included with your ECOSTONE.
RECOMMENDATION:
always use the USB cable included with your ECOSTONE
STEP 2
Power ON, Battery & LED Status Indicators
Once fully charged, press the STANDBY POWER button on the top of your ECOSTONE.
You will see the green LED light & you will hear an ascending bell tone when powering ON.
IMPORTANT:
be sure the MAIN POWER switch located in the back compartment under the cap is set in
the UPPER ON position. IF the switch is in the LOWER OFF position your ECOSTONE will not be able to
turn ON using the Standby button.
The LED battery level indicators are located on the top of the unit. Each bar represents 25%,
4 full LED’s indicates a FULL charge
AUDIO playback time over Bluetooth connection is approx. 12 hours at 75% max.
volume
