Open the CAP on the BACK of your ECOPEBBLE.
Turn on the MAIN POWER SWITCH. Listen for
announcement, “Power On” / “Power On, Pairing
Ready” & look for the back panel LED to flash Blue.
Search your Smart Device for a Bluetooth
Connection and select ‘ECOXGEAR’. Listen for
announcement, “Bluetooth Connected.”
Select & Play your Music from your Smart Device.
IMPORTANT HINTS
•
MAIN POWER SWITCH must be set to the ON position to operate your ECOPEBBLE.
•
When the Main Power Switch is set ON, use the STANDBY POWER BUTTON to turn unit ON/OFF.
•
PRESS & HOLD the STANDBY button for 3-5 seconds to power ON/OFF your ECOPEBBLE.
•
When not in use for extended periods, set the Main Power Switch to the OFF position.
•
Auto connect to your device by using the STANDBY button only to power ON/OFF, and do NOT turn OFF the Master
Power Switch. When the Master Power Switch is turned OFF, the ECOPEBBLE resets and previous connections
are deleted from the memory. When the Master Power Switch is turned ON, you must pair to your device again.
QUICK START 4-STEPS
CONTROL BUTTONS & OPERATIONS
STANDBY ON/OFF
PRESS & HOLD the STANDBY
POWER button for 3-5 seconds to
turn it ON/OFF. ECOPEBBLE remains
in Standby Power mode when OFF.
IMPORTANT: Standby Power
function will NOT operate when the
Main Power is set OFF. Main Power
Switch on the back panel must be set
ON for Standby to operate.
PLAY / PAUSE ANSWER
PRESS ONCE to pause & play
song tracks and to answer
incoming mobile calls.
1
2
3
4
TRACK SELECTION/
SPEAKER VOLUME
PRESS ONCE for previous track selection.
PRESS & HOLD to decrease the volume.
TRACK SELECTION/
SPEAKER VOLUME
PRESS ONCE to advance the
track selection.
PRESS & HOLD to increase
the volume.
NOTE: Some Bluetooth
devices must be manually
set at maximum audio level.
Your ECOPEBBLE will beep
to indicate when maximum
volume setting is reached.
