background image

 6) 

AVOID

 prolonged exposure to ultraviolet 

 

radiation (UV sunlight) and strong 

 magnetic 

fields.

  7) Periodically check the rubber seal for 
 premature 

wear.

 8) Periodically clean the rubber with a soft 
 

moist cloth and ensure no objects such as 

 

dirt, hair, or sand are on the rubber seal ring. 

 Do 

NOT

 use any oily solvent  or chemicals 

 for 

cleaning.

 9) Rinse off the unit with tap water after use in 
 

salt water or swimming pool.

10) Power and / or charge the built-in 
 

rechargeable battery for portable use by 

 

connecting the USB cord to a computer 

 

USB connection or to an AC outlet using the 

 

AC-to-USB cord 5V, 1A power adapter 

 

intended for use with the unit.

 11) Noise and audio distortion may occur when 
 

the batteries are nearing end of charge.

 12)  Do 

NOT

 remove the built-in battery. Do 

 

NOT

 remove the grill covers.

LIMITED MANUFACTURER’S 
WARRANTY:

The EcoEdge Pro is covered by a 1-year limited 
warranty that covers defects in workmanship 
and / or materials for a period of 1 year from 
original purchase date. This warranty does 
not apply to any products which have been 
abused, neglected, modified, or used for a 
purpose other than the one for which they were 
manufactured. Please refer to the above care 
and maintenance instructions for suggested 
care details. The warranty is valid only for 

LED Status Indicators

Power, Charging, Bluetooth, 
and Mode Status LEDs

Control Buttons

Battery Level 

Indicators

Summary of Contents for EcoEdge Pro GDI-EXEDGPRO401
























Reviews: