6
Connect
+
Power
In/Out Connections
Do
NOT
use these connections if they are wet.
Microphone Input:
You can input a microphone, guitar, or other musical
instrument. Port is ¼" (6.35 mm).
Auxiliary Input:
This input can be used to connect a CD player,
MP3 player, etc.
USB Charging Port:
Connect your device’s charge cable here to charge it.
USB charging only functions when the EcoBoulder Max’s power is turned
on. USB port rating is 5V, 2.1A.
Power
Do
NOT
plug unit into wall power outlet if power cable jack is wet.
Use Caution:
120V AC Power Input. Contact may cause electric shock and
injury if wet.
Insert the included power cable to charge the EcoBoulder Max.
The
icon will be on when plugged into AC power. When the power
cable is connected, blinking of the battery segments shows the battery
is charging. When fully charged, all battery segments will be lit without
blinking. It can take 4 to 8 hours to fully recharge the battery from empty.
Notes:
· Fully charge prior to first use (4-8 hours).
· Fully charge prior to extended storage (4-8 hours).
· The EcoBoulder Max can be played while battery charges.
· Contact Grace Digital at
prior to attempting
to replace battery.
· Store unplugged, but fully recharge every 3 months (4-8 hours).
· Do
NOT
leave a unit plugged in and charging continuously for more
than 8 hours after the unit indicates a full charge.
19
A
C
B
D
EcoCast: Additional Receiving Speakers
1. Power on the additional EcoBoulder Max speaker(s) (
Speaker C
and
Speaker D
). Press the EcoCast button
to cycle through to and
initiate EcoCast Receiving Mode. The EcoCast Receiving icon
will flash on the LED screen, and the speaker(s) will announce,
“EcoCast
receiving.”
2. On
Speaker A
(the speaker with the EcoCast Transmitting icon
on),
PRESS AND HOLD
the EcoCast button
for 3 seconds. The
EcoCast
transmitting
icon
will
flash.
3. Once the connection between the speakers is successful,
Speaker C
(and
Speaker D
) will announce, “Connection Successful,” and start
playing music from your Bluetooth device.
Notes:
· If all the speakers are turned off, then turned on, the speaker(s) in
EcoCast Receiving Mode (
Speakers B
,
C
, and
D
) will automatically
re-connect to the speaker in Transmitting Mode (
Speaker A
). If they are
not automatically re-connected, please follow the above steps.
· You can also pair the EcoBoulder Max with any other ECOXGEAR
speaker bearing the EcoCast symbol
.
· The EcoCast functionality is only available while using Bluetooth as
your Audio Source at a maximum range of 30 feet between speakers.
· While connecting the EcoBoulder Max speakers, make sure that the
speakers are within a few feet of each other.
