The LED indicator will flash
RED
when the battery
is running low. Your BA80 has a micro USB port to
connect to the USB cable and charge the unit by
connecting it to a USB port on a computer or to an
optional USB to wall outlet power adapter (
NOT
included). The BA80 cannot operate as a Bluetooth
adapter while it is charging.
The LED located on the front panel indicates the
charging status when connected to a power source:
•
BLUE
LED indicates a full charge
•
RED
LED indicates charging in process
NOTE:
Approximately 1.5 hours of continuous charging time is required
to fully charge your BA80.
RECOMMENDATION:
Use the USB cable included in the box.
Bluetooth Pairing and Connection Failure
Check if your Bluetooth device is still connected to another device.
Disconnect that device. Now reattempt to pair with the BA80.
Sound is Distorted or Interrupted
•
There is a barrier between device and BA80: Please clear it away.
•
The distance between the BA80 and connected device is out of
normal connection range: Please bring them nearer to each other.
•
The LED indicator is flashing
RED
: The BA80 battery is low,
please recharge it.
CAUTION:
Prolonged use of earphones at high volume may cause
irreparable hearing loss. We strongly advise you to adjust your BA80
volume to a reasonable level. The higher the volume for a prolonged
time, the higher the risk of damaging your hearing.
Use your BA80 esponsibly! It is dangerous, and even illegal in
some areas, to use earphones in situations that require your full
attention, such as driving a car or motorcycle, riding a bicycle, and
crossing a street.
Trouble Shooting
Charge Your BA80 Wireless Audio Adapter
