Bluetooth Pairing & Audio
CONNECTING WITH BLUETOOTH:
CONNECT TO YOUR SMART DEVICE & PLAY AUDIO
When your BA80 is turned on, the LED Indicator on
the front panel will flash
BLUE
and
RED
, indicating the
unit is powered on and ready to pair. The unit shall also
announce “Power On, Pairing” when powered on.
Connect your wired device to the BA80 AUX IN port.
Pairing Mode
Pairing Mode will last for approximately 5 minutes. If no devices are
paired within that time, the BA80 will automatically turn off.
Turn on your smartphone’s Bluetooth. Set the smartphone to
Pairing Mode. Available Bluetooth connections shall appear. Select
‘ECOXGEAR’ from the list of discovered devices on your smartphone.
Wait a few seconds until the connection is completed.
NOTE:
Some Bluetooth devices may ask for a password. Enter, ‘0000’
to connect.
When the ‘ECOXGEAR’ selection is made and the Bluetooth
connection is complete, your BA80 will announce, “Pairing Successful,
Connected,” and the LED Indicator will flash
BLUE
. Once connected,
select and play your desired audio.
Your BA80 should sync & wirelessly pair with most Bluetooth
enabled devices. The unit remembers the last device paired and will
automatically search for previous connections when it is turned on
or when a device comes back into Bluetooth range. If a connection
is dropped, the BA80 will look to re-establish that connection. If
Bluetooth is turned off on your smartphone, the BA80 may
NOT
automatically look for the device.
RECOMMENDATION:
If you are not familiar with Bluetooth pairing for
your smartphone, or other Smart-Device, refer to the User Guide for
your smartphone to learn how to add and pair a new device (BA80 for
instance) to your smartphone using Bluetooth.
Bluetooth Pairing & Connections
Once paired, should you have an issue switching between Bluetooth
connections on current or new devices, open the Bluetooth Section
within the device currently connected to the BA80 and delete the
‘ECOXGEAR’ Bluetooth selection from your phone. The BA80 will
then be available to pair & connect to an alternate Bluetooth enabled
smartphone / Audio Device.
If pairing is unsuccessful, turn off the headphone first and then re-pair
again following the above steps.
