Ecox EPLT, Owner'S Manual, Page: 5 / 16

5
REMOTE CONTROLLER
SPLIT AIR CONDITIONER
EPLT
FUNCTION BUTTONS
1
2
3
4
5
ON/OFF Button: Operation starts when this button is pressed and stops when this
button is pressed again.
MODE Button:
Each time the button is pressed, the operation mode is selected in a sequence of
following:
FAN/SLC Button:
Used to select the fan speed in four steps:
If pushing more than 2 seconds, the Silence function will be activated, pushing
more than 2 seconds again to disable.
When the Silence function is activated, the compressor will operate at low
frequency and the indoor unit will bring faint breeze, which will reduce the noise
to the lowest level and creat a quiet and comfortable room for you. Due to low
frequency operation of compressor, it may result in insufficient cooling and heating
capacity.
SLEEP Button
Active/Disable sleep function. It can maintain the most comfortable temperature
and save energy. This function is available on COOL, HEAT or AUTO mode only . For
the details, please see sleep operation in "USER´S MANUAL".
While the unit is running under SLEEP mode, it would be cancelled if MODE, FAN SPEED
or ON/OFF button is pressed.
FRESH Button
Pushing this button to activate the FRESH function. Pushing it again to disable.
NOTE
NOTE
AUTO COOL DRY FAN
HEAT
Please do not select HEAT mode if the machine you purchased is cooling only type. Heat
mode is not supported by the cooling only appliance.
AUTO LOW MED HIGH