Ecox EAEM, Owner'S Manual

Page: 8 / 12

8
REMOTE CONTROL
SPLIT AIR CONDITIONER
EAEM
NOTE
AUTOMATIC OPERATION
COOL / HEAT
(COOLING ONLY MODEL WITHOUT)
AND FAN OPERATION
1
2
3
4
1
2
Switch on the power and the OPERATION indication lamp on the display panel of the
indoor unit starts flashing, and turns oft after flashes for 6 times.
Use the MODE button to select AUTO.
Push the TEMP button to set the desired temperature within a range of 17º C ~ 30º
C / 63º F ~ 86 º F.
Push the ON/OFF button to start the air conditioner. The OPERATION lamp on the
display panel of the indoor unit lights. The FAN SPEED is automatically set and there
are no fan speed indicators shown on the display panel of the remote control.
Push the ON/OFF button again to stop the unit operation.
3
4
1
2
In the AUTO mode, the air conditioner can logically choose the mods of COOL, FAN and
HEAT by sensing the difference between tire actual ambient room temperature and the
set temperature on the remote control.
If the AUTO mode is not comfortable for you, the desired mode can be selected manually.
If the AUTO mode is not comfortable, you may manually over-ride the settings by
using COOL, HEAT or FAN modes
Push the TEMP button to set the desired temperature within a range of 17º C ~ 30º
C / 63º F ~ 86 º F.
Push the FAN SPEED to select the FAN mode of AUTO, HIGH, MED or LOW.
Push the ON/OFF button, the operation lamp lights and the air conditioner start to
operate as your settings. Push the ON/OFF button again to stop this unit operation.