38
2. Check the wind direction offset (Default: equals to the current wind
direction )
If:
Current wind direction offset < 180, then it should be calibrated to be:
current wind dir 180
If:
Current wind direction offset > 180, then it should be calibrated to be:
current wind direction - 180
For example, if the current wind direction is 288, then you’ll need to
set the wind direction offset to be: 288-180=108.
If the current wind direction is 12,then you’ll need to set the wind
direction offset to be: 12+180=192.
(6) The rain collector is calibrated at the factory based on the funnel
diameter. The bucket tips every 0.01” or 0.1m of rain (referred to as
resolution). The accumulated rainfall can be compared to a sight glass rain
gauge with an aperture of at least 4” or 0.1m.
Make sure you periodically clean the rain gauge funnel.
If there’s any question, please contact us at [email protected] or
[email protected] (EU/UK).
6.10 Other Features
6.10.1 Factory Reset/Clear Memory
To restore the console to factory default, perform the following steps:
1. Remove the power from the console by removing the batteries and
disconnecting the AC adapter.
2. Apply power by connecting the AC adapter.
3. Wait for all of the segments to appear on the screen,.
4. Press and hold the
WIND/+
and
PRESSURE/-
buttons at the same
time until the console power up sequence is complete (about 5
seconds).
Summary of Contents for WS2910
Page 49: ...49 List display Weather Map ...
Page 50: ...50 Email Alerts ...
