38
Please check your Wi-Fi router or AP devices setting and contact us if you
still have problem in connecting the console to your Wi-Fi network.
Note:
If you are testing the setup with the outdoor sensor package nearby
and indoor, you may want to consider connecting to Wi-Fi, but not
yet configuring any of the weather services. The reason is that while
indoor the temperatures and humidity recorded by the outdoor sensor,
and as reported to the weather service(s) will reflect indoor conditions,
and not outdoor conditions. Therefore, they will be incorrect.
Furthermore, the rainfall bucket may be tripped during handling,
causing rain to register while it may not actually have been raining.
One way to prevent this is to follow all instructions, except to use an
incorrect password, on purpose! Then, after final outdoor installation,
come back and change the password after clearing console history.
That will start uploading to the services with a clean slate.
8.1.1 Download mobile application
Wi-Fi configuration is done using your mobile device, either iOS or Android.
Start by downloading the
ecowitt
application from the Apple App Store or
Google Play store, as appropriate for your device.
8.1.2 Configure Wi-Fi via BLE
Press button “TEMP/+” and “LIGHT” button at the same time and hold for 2s
will activate configuration mode. The following display will be on at the Date
section on LCD
:
Please make sure ecowitt app installed on your phone has its location and
WiFi access allowed. Otherwise the APP will lead to error result.
8.1.2.1
Run the
ecowitt
app from your mobile device’s home screen.
For detailed ecowitt APP operation, please refer the product page on
and view the ecowitt APP operation instruction accordingly.