ECOWITT WN190 Operation Manual Download Page 42

Page: 42 / 67

*Note: After step 7) you can set the uploading to weather servers (Ecowitt

Weather / Weather Underground / Weather Cloud / WOW / Customized Website)

on this page or do that after the Wi-Fi configuration done.
If you configured weather services after the Wi-Fi configuration done, select your

device from the device list. This will bring you to the “Live Data” screen.
On the “Live Data” screen, press the “More” button in the upper right and select

“Weather Services” from the menu. This will bring you to the “Upload” screen for

the device.

7)*

Press

Scan

and select

your SSID from the list.

If it is a dual band router

and the SSIDs are

different, make sure you

connect to the 2.4 GHz

band.

Upload your data to

www.ecowitt.net

Tap

and select an

upload interval in minutes

Make a note of the MAC

address. You will need

this to create an account

on www.ecowitt.net

Upload your data to

Wunderground.com

station at Wuderground.com

per

Section 8.3

Enter the Station ID and

Station Key obtained from

Wunderground.com into this

panel

Summary of Contents for WN190




































































Search results

Summary of Contents for WN190

Reviews:

Related manuals for WN190

Brands by name

Popular brands

ECOWITT WN190, Operation Manual

Search results

Summary of Contents for WN190

Reviews:

Related manuals for WN190

Brands by name

Popular brands