ECOWITT GW1002, Operation Manual

Page: 4 / 58

4
2 Unpacking
Open your weather station box and inspect that the contents are intact
(nothing broken) and complete (nothing missing). Inside you should find the
following:
QTY Item Description
1 USB Wi-Fi Gateway
1 Cable clip
1 Wireless anemometer body with built-in: Wind speed/direction sensor,
Light and UV sensor, Solar panel
1 Wind speed cups (to be attached to anemometer sensor body)
1 Wind vane (to be attached to anemometer sensor body)
1 Outdoor temperature and humidity sensor
1 Rain gauge sensor
2 U-Bolts set for mounting on a pole (2pcs/set)
2 Threaded nuts for U-Bolts set (M5 size) (4pcs/set)
2 Metal mounting plate set to be used with U-Bolts (1pcs/set)
1 Stainless steel tube (for mounting the rain gauge sensor)
1 Stainless steel filter for rain gauge collector
1 Mini wrench for M5 bolts
1 User manual (this manual)
Table 1: Package content
If any component is missing from the package, or broken, please contact our
Customer Service department to resolve the issue.
Note: The gateway must be plugged into a USB (2.0 or later) port for its power
supply. You may want to use a USB extension cable (USB type A - Male
straight to female straight; not included) to allow for easier placement.
Note: Batteries for the wireless anemometer and the rain gauge sensor are not
included. You will need 1 AA size battery, alkaline or Lithium (Lithium
recommended for the rain sensor ) type for each unit.