09
08
https://www.altonindustries.com
How to Use
6.Self-cleaning and charging station installation:
1.Charging:
As shown in the figure below, align the machine with
the charging station, and the battery contact with
the charging station contact in place to start charging.
2.Self-cleaning:
When the machine is charging on the charging station,
press the self-cleaning button to enter the self-cleaning
mode. (Please make sure there is water in the clean
water tank while using).
3.Use:
Tilt the machine to the right angle and press the power
button to start working.
Warning:
-lf there is a large amount of foam in the dirty water tank during the working process, please clean up the dirty
water tank in time to avoid the water flowing to the fan motor.
-Prohibit fast pushing and pulling during the working process, so as not to cause the water flowing to the fan motor.
-While working, please be attentive to the dirt inside the dirty water tank, so as not to block the detector to affect the
full water detection.
-Please turn off the power before charging.
Insert the adapter charging port into the corresponding position of the charging
station and the adapter head into the home socket.
