5
When the transformer is plugged into the electrical outlet, a model code and a test
number (example: J1.1), begin to flash in the faceplate display (See Figure 6).
Then, “12:00” and the words “PRESENT TIME" begin to flash.
NOTE:
If “- - - -” shows in the display, press the
UP or
DOWN button until
the model code (See table at right) shows in the display. Then, press the
SELECT button to set, and change to the flashing “PRESENT TIME" dis-
play.
FIG. 5
FIG. 6
UP button
DOWN
button
Display
RECHARGE
button
SELECT
button
FIG. 7
Programming the Water Softener
Model
Code
Atlas 9
EL 9
Atlas 15
EL15
Atlas 20
EL20
A. SET TIME OF DAY
If the words “PRESENT TIME" do not show in the display, press the SELECT but-
ton several times until they do.
1
. Press the
UP or
DOWN buttons to set the present time. Up moves the
display ahead; down sets the time back.
NOTE:
Press buttons and quickly release to slowly advance the display. Hold the
buttons down for fast advance.
2
. When the correct time is displayed, press the SELECT button, and the display
will change to show the “Hardness” screen.
