ECOVACS Deebot X1 OMNI, Instruction Manual

Page: 26 / 28

No. Malfunction Possible Causes Solutions
The cleaning area is not well illuminated.
Smart Recognition requires sufficient lighting. Please
make sure the areas to be cleaned are well illuminated.
13 AIVI Visual Detection Sensor
cannot recognize objects.
Clean the lens with a clean soft cloth, and make sure
AIVI Visual Detection Sensor lens is dirty or blocked. the sensor is not blocked. Avoid using any detergent or
cleaning spray while cleaning.
Dust Collection Cabin is not closed. Please close the Dust Collection Cabin .
Dust Bag is not installed in the Station. Install the Dust Bag, and close the Dust Collection Cabin .
Manually moving DEEBOT back to the Station might It is recommended to let DEEBOT return to the Station on its own.
not trigger Auto-Empty function. Please do not manually move it.
DEEBT will automaticlly return to the Station in Video DEEBOT will not do cleaning task and empty the Dust Bin in
After returning to the Station, Video Manager mode. This is a normal phenomenon, please rest
14 DEEBOT does not empty the
Manager mode.
assured to use.
Dust Bin.
In Do Not Disturb mode, DEEBOT will not empty the Cancel Do Not Disturb mode in ECOVACS HOME App or
dust after returning to the Station. manually start dust empty.
Replace the Dust Bag according to the [ Maintenance ] section and
The Station detects a decrease in empty efficiency. close the Dust Collection Cabin If the Dust Bag is not full when
prompted by ECOVACS HOME App, you can put it back again.
If the above possible causes have been ruled out,
Please contact Customer Care for help.
components of the Station may be abnormal.
Replace the Dust Bag according to the [ Maintenance ] section and
The Station detects a decrease in empty efficiency. close the Dust Collection Cabin . If the Dust Bag is not full when
15 Fail to empty the Dust Bin.
prompted by App, you can put it back again.
The outlet of Dust Bin is blocked by foreign objects. Remove the Dust Bin and clean the foreign objects on the outlet
Fine particles are absorbed in the inner side of Dust
Clean the inner side of Dust Collection Cabin .
16 The inner side of Dust Collection Collection Cabin through the Dust Bag.
Cabin is dirty.
The Dust Bag is broken. Check the Dust Bag. Replace it.
17 Ash leakage occurs during The outlet of Dust Bin is blocked by foreign objects. Remove the Dust Bin and clean the foreign objects on the outlet.
working.
IEII
26