ECOVACS DD3G Instruction Manual Download Page 3

FR-CA

3

EN

22. Do not use with a damaged power cord or receptacle. Do not use the Appliance or Charging 

Dock if it is not working properly, has been dropped, damaged, left outdoors, or come in 

contact with water. It must be repaired by the manufacturer or its service agent in order to 

avoid a hazard.

23. Turn OFF the power switch before cleaning or maintaining the Appliance.

24. The plug must be removed from the receptacle before cleaning or maintaining the Charging 

Dock.

25. Remove the Appliance from the Charging Dock, and turn OFF the power switch to the 

Appliance before removing the battery for disposal of the Appliance.

26. The battery must be removed and discarded according to local laws and regulations before 

disposal of the Appliance.

27. Please dispose of used batteries according to local laws and regulations.

28. Do not incinerate the Appliance even if it is severely damaged. The batteries can explode in 

29. When not using the Charging Dock for a long period of time, please unplug it.

30. The Appliance must be used in accordance with the directions in this Instruction Manual. 

ECOVACS ROBOTICS cannot be held liable or responsible for any damages or injuries 

caused by improper use.

31. The robot contains batteries that are only replaceable by skilled persons. To replace the 

robot’s battery, please contact Customer Service.

32. If the robot will not be used for a long time, power OFF the robot for storage and unplug the 

Charging Dock.

33. WARNING: For the purposes of recharging the battery, only use the detachable supply unit 

CH1465A provided with this appliance.

34. The Remote Control pre-installs two non-rechargeable AAA batteries. To replace the 

battery of the Remote Control, please turn over the Remote Control, press and remove its 

Battery Cover. Remove the batteries, and insert the new batteries with the correct polarity. 

Reassemble the Battery Cover.

35. Non-rechargeable batteries are not to be recharged.

36. Different types of batteries or new and used batteries are not to be mixed.

37. Batteries of the Remote Control are to be inserted with the correct polarity. 

38. Exhausted batteries are to be removed from the Appliance and safely disposed of.

39. If the Remote Control is to be stored unused for a long period, the batteries should be 

removed. 

40. The supply terminals are not to be short-circuited.

1. Important Safety Instructions

Summary of Contents for DD3G























Reviews: