ECOTEST MKS-UM, Operating Manual, Page: 76 / 119

74
The current time values are displayed from the built-in clock or the navigation
receiver. If the navigation receiver is on and reliable data is available, the current
time is displayed from the navigation receiver, otherwise - from the built-in clock.
2.3.6.9.5
Submode of the control unit “Time and date correction”
2.3.6.9.5.1 If the navigation receiver is off and you press and hold
THRESHOLD longer than for 4 s, it switches the control unit to the submode of time
and date correction.
Important! If the navigation receiver is on, the submode of time and date
correction is not available.
If the values of minutes are blinking, it means that the control unit is in the
submode of time and date correction (Figure 2.34).
Figure 2.34 – LCD of the dosimeter
(submode of time and date correction – correction of hours and minutes)
If the value of minutes is blinking, it means that it can be changed. Press
RAYS/RESTART to set the required value of minutes. Successive short presses and
releases of RAYS/RESTART change the value per unit. A long press of
RAYS/RESTART starts automatic change of values, which is stopped as soon as
RAYS/RESTART is released.
A short press of MODE records the value of minutes (they stop blinking at
that) and enables changing the value of hours that start blinking. The value of hours
is programmed in a similar way to the value of minutes.
A short press of MODE records the value of hours (they stop blinking at that)
and a year, a month and a date are displayed on the LCD.
Low-order digits of the year are blinking, which means that their value can be
changed. Press RAYS/RESTART to correct the value in a similar way to correction
of minutes. The value of the year can be set within the limits from 2014 to 2099.
A short press of MODE records the value of year (low-order digits of year
stop blinking) and the LCD displays a date, a month and a year.