73
A short press of ON/SAVE closes the submode of the new local time offset
programming relative to GMT. The new offset blinks three times on the LCD, which
means that it has been recorded in the nonvolatile memory of the control unit. After
that the control unit returns to the navigation receiver control mode.
Important!
If the submode of the new local time offset programming relative
to GMT is paused for more than 20 seconds (the user will not click any button), the
control unit automatically returns to the mode of navigation receiver control. All
changes that have been made in the submode of the new local time offset
programming relative to GMT will be canceled.
2.3.6.9.4
Operating mode of the control unit “Current time and date
display”
2.3.6.9.4.1 Shortly press MODE to enter this operating mode from any other
mode of the control unit. This mode follows the mode of navigation receiver control.
2.3.6.9.4.2 The LCD of the dosimeter displays the following information in
this mode (Figure 2.33):
- hours (1);
- minutes (2);
- date (3);
- month (4);
- navigation receiver status symbol (5);
- battery status symbol (6);
- sign (7) of critical filling of the dosimeter’s nonvolatile memory, where DE
accumulation history is stored (2.3.4 of this OM).
Figure 2.33 – LCD of the dosimeter
(Current time display mode)
If you shortly press MODE, a year will be displayed instead of the date and
the month.
Summary of Contents for MKS-UM
Page 1: ...MKS U MULTIPURPOSE DOSIMETER RADIOMETER Operating manual...
Page 2: ......