MANUAL
ILARIA
MANUAL
MANUAL
MANUAL
ILARIA
ILARIA
ILARIA
-10-
-10-
-21-
-21-
7.5.3. Language
The language can be selected from Italian, German, French and English.
To access the setting, select the LINGUA [SET LANGUAGE] menu and use buttons P4 and P5 to
select the desired language.
7.5.4. Stove status
The STATO STUFA [STOVE STATUS] menu displays the exhaust fan speed, the set room
temperature and the status of the screw conveyor.
7.5.5. Operating hours menu
The ORE LAVORO [OPERATING HOURS] menu item shows the total operating hours of the
stove.
7.5.6. Display Settings menu
Many of the operating parameters of the stove are loaded at power-up from an external flash
memory to the microcontroller. To display these parameters and the corresponding values, enter the
VEDI TARATURE [DISPLAY SETTINGS] menu and use P6 and P7 to scroll the list. The complete
list is shown at the end of the chapter.
7.5.7. Databank menu (password-protected)
All the parameters can be set together based on a preset table (Database) resident in the ROM
on the microcontroller. Enter the BANCA DATI [DATABANK] menu, use P5 to set the value “00” as
the ACCESS KEY (or “o1”, “o2”,… if there is more than one databank) and confirm by pressing P6.
The message “DATI CARICATI” [DATA LOADED] confirms the operation.
7.5.3. Language
The language can be selected from Italian, German, French and English.
To access the setting, select the LINGUA [SET LANGUAGE] menu and use buttons P4 and P5 to
select the desired language.
7.5.4. Stove status
The STATO STUFA [STOVE STATUS] menu displays the exhaust fan speed, the set room
temperature and the status of the screw conveyor.
7.5.5. Operating hours menu
The ORE LAVORO [OPERATING HOURS] menu item shows the total operating hours of the
stove.
7.5.6. Display Settings menu
Many of the operating parameters of the stove are loaded at power-up from an external flash
memory to the microcontroller. To display these parameters and the corresponding values, enter the
VEDI TARATURE [DISPLAY SETTINGS] menu and use P6 and P7 to scroll the list. The complete
list is shown at the end of the chapter.
7.5.7. Databank menu (password-protected)
All the parameters can be set together based on a preset table (Database) resident in the ROM
on the microcontroller. Enter the BANCA DATI [DATABANK] menu, use P5 to set the value “00” as
the ACCESS KEY (or “o1”, “o2”,… if there is more than one databank) and confirm by pressing P6.
The message “DATI CARICATI” [DATA LOADED] confirms the operation.
20cm
20cm
10cm
10cm
5.1.3. Minimum distance between the stove and other materials
If positioned in this way, leave at least 20 cm from the walls
If positioned in this way, leave at least 10 cm from the walls
-side wall of the stove 20 cm
-shelving above 20 cm
-floor protection 20cm
These indications may change due to regional or national standards. Always comply with the
standards in force in the country where the stove is installed (contact your authorised ecoteck
reseller).
20cm
20cm
10cm
10cm
5.1.3. Minimum distance between the stove and other materials
If positioned in this way, leave at least 20 cm from the walls
If positioned in this way, leave at least 10 cm from the walls
-side wall of the stove 20 cm
-shelving above 20 cm
-floor protection 20cm
These indications may change due to regional or national standards. Always comply with the
standards in force in the country where the stove is installed (contact your authorised ecoteck
reseller).
