p.
16
Maintenance
Wireless Driver Firmware Upgrade
Now that both drivers control dials
are blinking red/white, indicating
they are in Upgrade Mode, press
and hold SET button on either
driver until the control dials blink
green/blue for driver receiving new
firmware and red/green/red/blue
for the driver sending firmware.
The pumps will automatically
detect which is the latest
firmware and act accordingly.
Note: QuietDrive drivers only upgrade other QuietDrive drivers. Any QuietDrive driver with newer firmware can
upgrade another QuietDrive driver regardless of the model number (i.e. MP10w ES can upgrade a MP40w ES).
EcoTech Marine is continually upgrading and making your QD Pump better. Because of this, your driver may not
have the latest firmware. Fortunately, EcoTech makes it easy to upgrade your drivers firmware. To complete
this process you will need a driver with the latest firmware along with the driver that you want to upgrade.
Follow the instructions and diagram below to upgrade your drivers firmware.
Unplug your driver then hold MODE and SET simultaneously while plugging your driver in and continue holding
until the control dial has been red for approximately ten seconds. When the LED toggles between blinks red/
white, the driver is in Upgrade Mode. Release both the MODE and SET buttons. Repeat this step for second
driver.
Note: During the firmware upgrade process, turn off all Wireless Wave Drivers, EcoSmart drivers and QD drivers
within 100 feet of the two that you will be doing the upgrade process with. Also, move the two drivers that
you will be working with to within 3 feet of each other.
Powered Off
HOLD MODE + SET
Blinking Red/White
Sending New Firmware
Receiving New Firmware
Press SET on Either Driver
Summary of Contents for QuietDrive
Page 1: ...QUIETDRIVE User Manual...
