Ecostrad_iQ_WiFi_Element_V1.2_19072021 5
•
The element is designed for use in horizontal or vertical radiators, or vertical
towel rails. Use in horizontal towel rails is not recommended because the long
horizontal bars can impede heat circulation.
•
It is imperative that the towel rail or radiator intended for use with the radiator
has the correct volume of fluid. The recommend quantity of fluid with the
radiator or towel rail is 90% of the unit’s total volume. If you are installing the
element in a radiator or towel rail that has been pre-filled for use with this
element, do not allow fluid to escape when the element is fitted. In the case of
loss of heating fluid, contact your supplier.
•
The element must be installed by a licensed electrician in accordance with
current IEE wiring regulations.
•
The element must be connected to a 220-240 Volt AC mains power supply via
a fused spur cable outlet, and must be earthed.
•
The element is a Class I unit and therefore must always be earthed.
•
Ensure the element’s power cord does not touch the hot parts of the device or
the radiator.
•
Do not use the device if you detect damage to the mains plug or power cable.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons to avoid a hazard. All repairs and
servicing must be carried out by a qualified person.
•
The towel rail or radiator in which the element is installed must be permanently
fixed to the wall. Do not fit the radiator below or in front of an electric socket.
•
The element can be installed in bathrooms in Zone 1, as defined by applicable
law, subject to any additional regulations concerning electrical installations in
wet areas.
